Pembuatan Biodiesel dengan Proses Ekstraksi Reaktif dari Ampas Perasan Kelapa
Main Article Content
Abstract
Biodiesel merupakan energi terbarukan yang berasal dari minyak nabati atau minyak hewani. Pada penelitian ini pembuatan biodiesel dilakukan dengan metode ekstaksi reaktif (transesterifikasi insitu). Bahan baku yang digunakan yaitu ampas perasan kelapa dengan bilangan asam 0,5426 mg KOH/g, diameter partikel sebesar 1,12 mm. Katalis yang digunakan yaitu KOH 2%b/b pro analisis sedangkan metanol atau etanol teknis sebagai pereaksi. Transesterifikasi in situ ampas kelapa dilakukan pada temperatur reaksi 65°C dan kecepatan pengadukan 1000 rpm. Variasi variabel adalah waktu reaksi 4,5,6,7,8,9 jam dan jenis pereaksi yaitu metanol dan etanol teknis. Hasil penelitian ini menunjukan bahwa waktu reaksi dan jenis pereaksi berpengaruh terhadap yield biodiesel. Hasil penelitian menunjukan penggunaan metanol sebagai reaktan menghasilkan yield sebesar 85,97 % sedangkan etanol sebesar 53,57 %. Yield biodiesel 85,97% dengan reaktan metanol dicapai selama 8 jam. Hasil analisis biodiesel tersebut menunjukan bahwa nilai densitas, kadar air, viskositas memenuhi standar SNI Biodiesel No.7182-2012 sedangkan untuk gliserol total, dan bebas tidak memenuhi SNI.
Downloads
Download data is not yet available.
Article Details
How to Cite
Ridwan, I., Meylin, M., Puspitasari, R., Dewi, D. R., & Ghozali, M. (2017). Pembuatan Biodiesel dengan Proses Ekstraksi Reaktif dari Ampas Perasan Kelapa. Fluida, 11(2), 22-26. https://doi.org/10.35313/fluida.v11i2.83
Section
Articles
An author who publishes in the FLUIDA journal agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.