Application of Building Information Modeling in the Construction of the Parakan Lima Bridge in Purwakarta Regency
DOI:
https://doi.org/10.35313/potensi.v27i2.4024Keywords:
BIM, Cost Estimation Plan, Project Scheduling, AHSPAbstract
Parakan Lima Bridge was built by the Purwakarta Regency Government to improve transportation access. In this study, BIM was applied to the construction of the Parakan Lima Bridge by creating the bridge 3D model using Tekla Structures software, which can automatically generate the Quantity Take-Off of the project. The Quantity Take Off resulted from model were used as the basis for calculating the Cost Estimation Plan and project scheduling. The Cost Estimation Plan calculation was carried out by compiling the AHSP in Microsoft Excel, and the scheduling is created using Microsoft Project and Microsoft Excel software. The results of the 3D modeling, scheduling, and Cost Estimation Plan are then simulated in 4D and 5D using Navisworks software. To support the preparation of implementation methods and visualization during presentations, bridge animations are created using Sketchup and Lumion software, as well as Augmented Reality displays using Augin software. The result of this study shows that the cost estimate for the construction of the Parakan Lima Bridge was Rp 13,619,902,175 with an estimated project duration of 223 days, starting on May 23, 2022, and ended on December 31, 2022.
Downloads
References
[1] Supiandi, Asep. Jembatan Rp 15 Miliar Jadi Pembuka Akses Parakan Lima – Ciherang, SINDONews (2019). Available: https://daerah.sindonews.com/artikel/jabar/11934/jembatan-rp15-miliar-jadi-pembuka-akses-parakanlimaciherang,
[2] Transportasi sebagai Pendukung Sasaran Pembangunan Nasional, Kementerian Perhubungan Republik Indonesia (2017). Available: http://dephub.go.id/post/read/transportasi-sebagai-pendukung-sasaran-pembangunan-nasional
[3] Siswanto, Agus B. M. Afif Salim, Manajemen Proyek, CV. Pilar Nusantara (2019). Available: https://ftp.idu.ac.id/wpcontent/uploads/ebook/ip/BUKU%20MANAJEMEN%20PROYEK/ManajemenProyek.pdf
[4] Badan Pengembangan Sumber Daya Manusia Pusat Pendidikan dan Pelatihan Sumber Daya Air dan Konstruksi, Modul 3 Prinsip Dasar Sistem Teknologi BIM dan Implementasinya di Indonesia, Kementerian Pekerjaan Umum dan Perumahan Rakyat (2018). Available: https://bpsdm.pu.go.id/center/pelatihan/uploads/edok/2019/02/8b2aa_MODUL_3-PRINSIP_DASAR_SISTEM_TEKNOLOGI_BIM.pdf
[5] Tim BIM PUPR. Panduan Adopsi BIM dalam Organisasi, Pusat Litbang Kebijakan dan Penerapan Teknologi (2018). Available: http://bim.pu.go.id/assets/files/Panduan_Adopsi_BIM.pdf
[6] Sabil, D., & Erizal. (2023). Penerapan Building Information Modeling (BIM) 5D pada Proyek Gedung Simpang Temu Dukuh Atas, Jakarta Pusat. Jurnal Teknik Sipil dan Lingkungan, 8(02), 95-104. https://doi.org/10.29244/jsil.8.02.95-104
[7] Peraturan Menteri PUPR No. 1 Tahun 2022, Kementerian Pekerjaan Umum dan Perumahan Rakyat (2022). Available:
[8] Keputusan Wali Kota Bekasi Nomor 913/Kep. 32-Bang/I/2021 Tentang Harga Satuan Pokok Kegiatan Pemerintah Kota Bekasi Tahun Anggaran 2021, Jaringan Dokumentasi dan Informasi Hukum (JDIH) (2021). Available: https://jdih.bekasikota.go.id/jdih/web/uploads/kepwal_21-05-10%2003:13:03_.pdf
[9] Spesifikasi Umum Bina Marga 2018 Revisi Final, Kementerian Pekerjaan Umum dan Perumahan Rakyat (2019). Available: https://keselamatanjalan.wordpress.com/2020/11/18/spesifikasi-umum-bina-marga-2018-revisi-2/
[10] PD 8 Table System, PERI (2022). Available: https://www.peri.id/products/scaffolding/shoring/pd8-shoring-system.html
[11] Ramadhan, Alfahmi Gustav, Fauziah Hasanah Lukman. Perencanaan Anggaran Biaya dan Penjadwalan Pekerjaan Flyover pada Ruas Jalan Dr. Djunjunan Kota Bandung. Tugas Akhir Program Diploma Empat Politeknik Negeri Bandung (2020). Available: http://digilib.polban.ac.id/files/disk1/248/jbptppolban-gdl-alfahmigus-12356-1-kelengka-3.pdf
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Potensi: Jurnal Sipil Politeknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All papers published in Potensi: Jurnal Sipil Politeknik are under a CC-BY-SA or The Creative Commons Attribution-ShareAlike License.
All submitted papers must be original. Works that have been published are not under consideration for publication in other proceedings or scientific journals. Authors are responsible for obtaining all necessary permissions to reproduce tables, figures, and images. The paper must not contain defamation and must not violate any other rights of third parties.
Authors agree that the editorial board’s decision regarding the opportunity for paper presentation is final. Authors are prohibited from attempting to influence the technical team in efforts to have their paper published.
Before the final acceptance of the paper, authors are required to confirm in writing that they hold all copyrights to their paper and grant the publishing rights to Jurnal Potensi: Jurnal Sipil Politeknik.
